Testing my self-made fertilizers, flood irrigation, and offline C# farm app across 3 crop cycles in Binh Duong before open-sourcing.
I left a 15-year ERP career to spend the last 3 years building EFG EcoSys on my own in Vietnam. My goal is simple: help smallholder farmers grow food outdoors in around 40°C heat without buying $50,000 greenhouses, expensive commercial fertilizers, or cloud subscriptions. I have already built the core pieces in my backyard lab and prepared a 1,817 m² test pilot in Minh Hoa, Binh Duong.
My personal savings ran out this month right as I am moving from home testing to outdoor field trials. I am asking for a small grant to finish 3 controlled crop cycles and publish all raw data openly ahead of my December 31, 2026 open-source release.
https://drive.google.com/drive/folders/1qQ1QRCqhzou7QpQuSV49xgVLPBNS1hYG?usp=drive_link
What are this project's goals? How will you achieve them?
I have three main things ready to test outside at Minh Hoa:
* Outdoor farming in around 40°C heat: I make liquid fertilizers from cheap bulk industrial precursors (A/B solutions that stay stable in storage for over 6 months) and pair them with low-pressure PVC flood-irrigation channels and straw/shredded weed mulch so roots do not cook in the sun. I also want to run side-by-side trials on my non-GMO selected lines, including purple-seeded winged beans and early-fruiting F2 custard apples (which flowered at ~30 cm tall).
* Field-testing my offline software (CROS): It is a 296,399-lines of code C#/.NET app I wrote to run locally on a cheap Mini PC with IP cameras and pump relays, using peer-to-peer sync instead of paid cloud servers.
* Bonus track (if stretch funding is met): Fixing self-discharge and moisture retention in my solid-state Geopolymer brick battery prototype, which reuses aluminum and electrolyte from waste Li-ion cells.
How will you know it worked?
I will run side-by-side control plots at Minh Hoa across 3 short crop cycles, logging yield, input cost, water use, EC/ppm/pH, and daily temperatures inside CROS. I will consider this a success if I publish:
* Clean side-by-side numbers comparing my self-made fertilizer + mulch/flood system against standard control plots under > 40°C.
* Continuous on-site logs showing CROS running with IP cameras and automated irrigation without cloud servers.
* Full raw datasets (both what works and what fails) so other farmers and researchers can verify or copy the setup.
$2,000 (minimum): Bulk fertilizer precursors, PVC flood-irrigation channels, mulch, basic EC/pH/temp sensors, and running costs for 3 controlled outdoor crop cycles at Minh Hoa.
More $2,000 (stretch target to $4,000): Weatherproof enclosures, cabling, and pump relays to deploy the CROS Mini PC and cameras outdoors, plus lab materials (tin oxide coating and gel-core additives) to stabilize the Geopolymer brick battery.
I am working solo on this right now (Nghi Le Tiet / Doctor Will). Before this, I spent 15 years building ERP systems in Vietnam. Over the past 3 years, I have been working full-time on EFG EcoSys out of my own savings.
So far I have written the 296,399-line C#/.NET app (CROS), prepared our 1,817 m² test plot in Minh Hoa, Binh Duong, formulated liquid fertilizers that stay clear in storage for over 6 months, and built a working 3-cell Geopolymer brick battery that lights an LED.
The biggest risks are practical field problems. First, El Nino heat in Binh Duong is already above 40°C, so I can only work outdoors from 5 am to 9 am and 4 pm to 5 pm, which slows down manual setup. Second, organic mulch might block or shift under the low-pressure PVC flood irrigation channels, and fruit-boring insects are still hard to stop without manual netting. Third, the Geopolymer battery stretch goal might still dry out or lose charge too fast over time.
Even if some of the crop or battery trials do not hit target yields, the fallback outcome is still useful: I will publish all raw field logs and failure notes openly so other farmers and researchers do not waste time repeating the same mistakes, and the CROS software codebase is already built and ready to open-source on December 31, 2026.
Zero in external funding. Everything over the last 3 years has been self-funded from my personal savings (including my last $8,000 spent on land prep and IoT hardware up to November 2026). This week I also submitted small grant applications ($500 to $4,000) to NLnet, 1517 Fund, Emergent Ventures, Experiment.com, and The Pollination Project, plus a larger proposal to The Liveability Challenge. All of them are still under review and none have been awarded yet.
There are no bids on this project.
Comments
Nghi Le Tiet
about 6 hours agoUpdate #1
Full Raw Evidence Package Uploaded (9 Field/Lab Videos + Digitized Lab Notebook Samples) We have just finalized and organized our public verification folder on Google Drive for reviewers and donors:
https://drive.google.com/drive/folders/1qQ1QRCqhzou7QpQuSV49xgVLPBNS1hYG?usp=drive_link
What’s newly added:
1. 9 raw, unedited videos across all 3 pillars:
- >40°C open-air cultivation & self-synthesized fertilizer trials (4 clips) - Solid-state Geopolymer brick battery benchtop load tests (3 clips) - Live CROS App local-first desktop/station demos + UI/SQLite architecture snapshots (2 clips + screenshots) 2. Handwritten Lab Notebooks (Public Sample Excerpts): - Excerpts from our 100+ page digitized lab logs (Electrochemistry Phase II overview & early fertilizer trials). Full timestamped archives are available upon request for technical due diligence.
Immediate next milestone (Nov 30 – Dec 2026):
- Deploying the offline CROS security/IoT node (Mini PC + 4G + solar/LiFePO4) at our 1,817 m² Minh Hoa pilot station, followed by our rolling open-source release of CROS App in mid-to-late December 2026.
Thank you to everyone reviewing and supporting independent frugal R&D!